process introduction
The content of silver-nickel material includes silver-nickel 10, silver-nickel 15, silver-nickel 20, silver-nickel 25 and silver-nickel 30
The application conditions of different content are also different
Silver nickel material is prepared by powder mixing process and extruded into wire material, which is used in rivet production of cold heading machine，the rear track is riveted on the copper piece by means of riveting pressure
It is an environmentally friendly material and a good substitute for cadmium oxide
The rivet is made of Silver nickel wire and copper wire through the form of cold heading.
The silver-nickel material is easy to make and the elongation of the material is good, so basically the rivet size can cover 1.6 mm to 8.0mm
Packaging and service
In order to prevent oxidation, our packaging is vacuum-pumped and sealed by a vacuum machine. Meanwhile, there is also a carton outside to prevent air leakage caused by collision
production capacity
We have more than 200 sets of equipment. By installing molds on the machines, we can carry out the production of the same specification. Therefore, the production capacity can be adjusted according to customers' orders
quality guarantee
The rivets are mainly divided into four external dimensions: head diameter, head thickness, foot diameter and foot length, and there are also projection dimensions such as silver layer, plane or circle surface and stripper Angle.
The production process has a special process inspector to control the quality, before the factory will have finished products inspection for final confirmation, qualified after storage
Hot Tags: silver nickel material rivet contact, China silver nickel material rivet contact manufacturers, suppliers, Internally Oxidized Alloy Sheet Contact, Magnetic Latching Relay Contacts, Silver Cadmium Oxide Rivet Compound Contacts, Silver Nickel Rivet Compound Contacts, Silver Tin Oxide Rivet Compound Contacts, Triplex Rivet Contact
