Process introduction
The silver nickel material general production process is mixed powder,
The silver powder and nickel powder are mixed through a mixing machine, and then the particles are screened and baked at high temperature to ensure that the inside is free of moisture.
The finished silver and nickel powder is made into a cylinder by the isostatic pressure equipment and then extruded at high temperature to form a circular wire
Because silver and nickel cannot combine, they can only be mixed by physical extrusion, so the internal structure of the material is relatively loose.
As the mixing process is relatively simple, the production cycle of the silk is generally 5 to 9 days,and the size of the wire can range from 0.8mm to 4mm
Performance introduction
Silver nickel is more resistant to fusion and burnout than pure silver or fine grain silver. These two properties of the product are improved due to the increased nickel content of the high melting point. All silver-nickel materials are very workable and easy to solder. When the DC is turned on and off, the material transfer is small, and silver nickel is an environmentally friendly material.
Application area
Since silver and nickel cannot be combined and can only be mixed by physical extrusion, the internal structure of this material is relatively loose, and it is not recommended for products above 25A
For low power products, especially dc conditions, the material has the ability to resist material transfer, and the production cost is low, so in the field of small current, more popular
Hot Tags: silver nickel wire, China silver nickel wire manufacturers, suppliers, Rivet Compound Contacts, Round Silver Wire, Silver Cadmium Oxide Wire, Silver Nickel Wire, Silver Tin Oxide Indium Oxide Wire, Silver Tin Oxide Wire
