Process introduction
The preparation process of double-sided inlaid silver alloy composite strip is generally a cold-rolled composite process. Two silver alloy materials are inlaid in a slotted copper strip and then compounded by a large roll to achieve the fusion effect
The two silver alloy composite strips are the composite of two silver alloy strips at any position of the copper substrate. Both sides of the silver alloy material are copper. The copper on both sides is cut out by the slicing machine to reach the required size
It is difficult to process, so the processing fee is relatively high, and the thermal composite process is unstable, so it can only be used to make Ag and AgNi materials temporarily
Production capacity
The production cycle of this product is generally 12 to 15 days. It is necessary to roll the silver alloy material into flat wire, and the copper material is slotted through the slotting machine. Finally, both are cold rolled
Packaging and service
After the completion of product compounding, it will be put into the automatic strip cleaning machine for processing, to ensure the clean surface, and finally vacuum packaging
Hot Tags: two side inlay silver alloy composite strip, China two side inlay silver alloy composite strip manufacturers, suppliers, Silver Alloy Composite Strip
