When we use a product, we always hope that it can be used for a long time, especially in the industrial field. But in many cases, the service life of a product is not only affected by its own quality, but also has a huge correlation with the daily use and maintenance. This is the case for stretch stamping die.
If we want to make the drawing stamping parts die have a long enough service life, then it is not only required that the products we purchase are guaranteed in quality, but also for the correct use, maintenance and maintenance of the die. One aspect of attention. The following is a summary of the contents of maintenance and repair work.
First of all, in order to ensure the accuracy of the product, it is necessary to arrange the staff to regularly check the related conditions of the drawing stamping die, if any abnormal conditions are found, they need to be handled in time. In addition, the spring of the mold needs to be regularly inspected and replaced, which can effectively avoid the fatigue damage of the spring and affect its use.
Secondly, in order to ensure its service life, then try to check it before starting to use it, and pay attention to the installation, first clean up the debris on the stretch metal stamping die and around its installation location , To ensure good cleanliness, after the installation is complete, remember to check whether the lubrication of the guide sleeve and the mold is suitable.
Then, in the installation process, in addition to requiring professional and experienced masters to operate, you must also use professional installation tools for installation. When installing the mold, try to use some softer materials such as copper or aluminum It is made as an operating tool, and knocking and other actions during installation are strictly prohibited to prevent damage to the tensile stamping parts. In addition, the installation should be carried out in the correct order, especially those with directional requirements should be attentive, do not install the wrong or reverse.
In the process of use, when it is found that the die of the drawn stamping part is worn, it must be stopped in time and repaired in time to avoid continued deterioration of the situation, which will lead to serious wear of the die and reduce the life, or affect the processing quality.
